coming down the back stretch of a kitchen renovation and love, love this utensil organizer. It's heavy duty and matches my new drawers perfectly! Like others have stated in the reviews.....put painter's tape or something similar along the cut lines when cutting it down to your custom size. It does make a big difference in helping the wood to not splinter and tear. Take a 220 grit sand paper and smooth out the cut edges and you're good to go.
The tall wood cutlery tray perfectly matches the interior of my custom cabinets. Make sure to measure because there are two different heights to choose from. Since my cabinets are custom is was nice to be able to trim to fit my drawers. We used blue painters tape to keep the edges from splintering as suggested in other reviews. Came out amazing!! The cabinet company wanted $100 extra per drawer to do this 😳 Thanks to Amazon Warehouse we got the custom look we wanted for $38!
A well-constructed product that uses metal screws that are flush to the underside of the organizer to fasten the upright slats. Based on your drawer size, you are most likely going to have to trim the organizer down to size. To make precise, straight cuts, I recommend a table saw or a miter saw. I rented a table saw and made three cuts to the organizer pictured. If your measurements and associated cuts are precise, the organizer will fit snugly into the drawer without further work. The only issue I did not anticipate were the sparks that occurred when I nicked one of the metal screws as I was cutting. The table saw cut through the screw with no problem and it did not damage or weaken the organizer, but I just wanted to point that out. Impressed with the quality of this product and will be buying more. My final recommendation -- make sure you make cuts with the proper equipment.
We placed this in a drawer with a matching Rev -a-Shelf knife block. We trimmed some off the back, and some off of both sides for a perfect fit. I’m making lots of changes to my kitchen and all the Rev-a-Shelf products I’ve used so far have been excellent quality & look amazing. I’m thrilled.
Needed to trim a bit off the back to get it to fit into the drawer but that's the point - a custom fit. Love it!
Feature Product
- (1) Wood cutlery drawer insert. . 2-7/8" for taller drawers. Recommded to trim using a table saw for a precise cut. Minumum Trim Size: 14-1/4" W x 15-1/2".Organize kitchen utensils..
Description
Organize kitchen drawers with Rev-A-Shelf’s Wood Cutlery Tray Insert. The 4WCT Series is made of our classic Maple hardwood with a UV cured clear finish to ensure an acceptable match to any kitchen cabinet. This modern day clutter solution requires a simple drop-in installation with two sizes that may be trimmed to fit various drawer sizes.
just put on table saw and cut to drawer width. SUPER EASY. LOOKS CUSTOM AF
Very easy to cut and install in the drawers. Excellent quality a great find!
This was just what I was looking for. It uses the entire drawer with no wasted space. Trimming it to fit was very easy with painter's tape and my table saw.
We bought several of these for our new kitchen. The drawers are small so wanted to optimize the space. They worked perfectly
Fits perfect and is much better than the plastic trays.
0 comments:
Post a Comment